SAFETY DATA SHEET

GEON L6610 NATURAL 0000

Section 1. Identification	

GHS product identifier	:	GEON L6610 NATURAL 0000	
Chemical name	:	MixtureCAS number	:	Mixture	Other means of identification	:	VC1001316060 Product type	:	solid	
Relevant identified uses of the substance or mixture and uses advised against
Product use	:	Industrial applications. Plastics.
Supplier's details	:	GEON Performance Solutions Canada Inc.17 Tideman Drive, Orangeville, ON L9W 3K31-800-GET-GEON or 1-800-438-4366	Emergency telephone number (with hours of operation)	:	CHEMTREC  International +1 703 741 5970
	
Section 2. Hazard identification	

Classification of the substance or mixture	:	Not classified.

GHS label elements

 Signal word	:	No signal word.	
 Hazard statements	:	No known significant effects or critical hazards.

Precautionary statements

   General	
:	
Not applicable.	

   Prevention	
:	
Not applicable.
   Response	
:	
Not applicable.	
 
   Storage	
:	
Not applicable.
   Disposal	
:	
Not applicable.

Supplemental label elements	
:	
Percentage of the mixture consisting of ingredient(s) of unknown oral toxicity:  94.8 %
Percentage of the mixture consisting of ingredient(s) of unknown dermal toxicity:  94.8 %
Percentage of the mixture consisting of ingredient(s) of unknown inhalation toxicity:  94.8 %	

Section 3. Composition/information on ingredients	

Substance/mixture	:Mixture	Chemical name	:	MixtureOther means of identification	:	VC1001316060

_There are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.	
Occupational exposure limits, if available, are listed in Section 8.
Section 4. First-aid measures	

Description of necessary first aid measures

  Eye contact	:	Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs. 	  Inhalation	:	Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur. 	
  Skin contact	:	Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. 	  Ingestion	:	Wash out mouth with water. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur. 	

Most important symptoms/effects, acute and delayed

  Potential acute health effects

   Eye contact	:	No known significant effects or critical hazards.
   Inhalation	:	No known significant effects or critical hazards.	
   Skin contact	:	No known significant effects or critical hazards.
   Ingestion	:	No known significant effects or critical hazards.

  Over-exposure signs/symptoms

   Eye contact	:	No specific data.	
   Inhalation	:	No specific data.
   Skin contact	:	No specific data.	
   Ingestion	:	No specific data.	

Indication of immediate medical attention and special treatment needed, if necessary
  Notes to physician	:	Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. 	  Specific treatments	:	No specific treatment. 	
  Protection of first-aiders	:	No action shall be taken involving any personal risk or without suitable training. 	
See toxicological information (Section 11)

Section 5. Firefighting measures	

Extinguishing media
	
  Suitable extinguishing media	:	In case of fire, use water spray (fog), foam, dry chemical or CO₂.	
  Unsuitable extinguishing media	:	None known.	

Specific hazards arising from the chemical	:	No specific fire or explosion hazard.	
Hazardous thermal decomposition products	:	May emit Hydrogen Chloride (HCl).
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
halogenated compounds
metal oxide/oxides	

Special protective actions for fire-fighters	:	Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.	
Special protective equipment for fire-fighters	:	Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.	

Section 6. Accidental release measures	

Personal precautions, protective equipment and emergency procedures

  For non-emergency personnel	:	No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective equipment. 	
  For emergency responders	:	If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non-emergency personnel". 	

Environmental precautions	:	Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).	

Methods and materials for containment and cleaning up

  Small spill	:	Move containers from spill area. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal contractor.	
  Large spill	:	Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal contractor. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.	

Section 7. Handling and storage	

Precautions for safe handling

Protective measures	:	Put on appropriate personal protective equipment (see Section 8).	
Advice on general occupational hygiene	:	Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.

Conditions for safe storage, including any incompatibilities	:	Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.	

Section 8. Exposure controls/personal protection	
Control parameters

Occupational exposure limits
  None.

Appropriate engineering controls	:	Good general ventilation should be sufficient to control worker exposure to airborne contaminants.Environmental exposure controls	:	Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Individual protection measures
	Hygiene measures	:	Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. Eye/face protection	:	Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with side-shields. 
Skin protection

  Hand protection	:	Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.  Body protection	:	Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.	  Other skin protection	:	Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.Respiratory protection	:	Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use. 
Section 9. Physical and chemical properties	

Appearance
	   Physical state	:	solid  [Pellets.]	
   Color	:	NO PIGMENT
Odor	:	Not available.  	
Odor threshold	:	Not available.	
pH	:	Not available.	
Melting point	:	Not available.	
Boiling point	:	Not available.	
Flash point	:	Not available.	
Fire point	:	Not available.	
Evaporation rate	:	Not available.	
Flammability (solid, gas)	:	Not available.
Lower and upper explosive (flammable) limits	:Lower: Not available. 
Upper:  Not available.	Vapor pressure	:	Not available.	
Vapor density	:	Not available.	Relative density	:	Not available.	
Solubility	:	Not available.Partition coefficient: n-octanol/water	:	Not available.	Auto-ignition temperature	:	Not available.	
Decomposition temperature	:	Not available.Viscosity	:	Dynamic: Not available.	
		Kinematic: Not available.

Aerosol product
	  Heat of combustion	:	Not available. 
	
  Ignition distance	:	Not available.	
  Enclosed space ignition - Time equivalent	:	Not available.	
  Enclosed space ignition - Deflagration density	:	Not available.	
  Flame height	:	Not available.	
  Flame duration	:	Not available.	

Section 10. Stability and reactivity	

Reactivity	:	No specific test data related to reactivity available for this product or its ingredients. 
	Chemical stability	:	Stable under recommended storage and handling conditions (see Section 7). 

Possibility of hazardous reactions	:	Under normal conditions of storage and use, hazardous reactions will not occur.

Conditions to avoid	:	Keep away from extreme heat and oxidizing agents.
	
Incompatible materials	:	Avoid contact with acetal homopolymers and acetyl homopolymers during processing.
	
Hazardous decomposition products		Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Section 11. Toxicological information	

Information on toxicological effects

  Acute toxicity

  Conclusion/Summary	:	Mixture.Not fully tested.	

  Irritation/Corrosion
Conclusion/Summary  Skin	:	Mixture.Not fully tested.	
  Eyes	:	Mixture.Not fully tested.	
  Respiratory	:	Mixture.Not fully tested.	

Sensitization

Conclusion/Summary   Skin	:	Mixture.Not fully tested.	
  Respiratory	:	Mixture.Not fully tested.	

Mutagenicity

Conclusion/Summary	:	Mixture.Not fully tested.	

Carcinogenicity

Conclusion/Summary	:	Mixture.Not fully tested.	
Reproductive toxicity

Conclusion/Summary	:	Mixture.Not fully tested.	

Teratogenicity

Conclusion/Summary	:	Mixture.Not fully tested.	

Specific target organ toxicity (single exposure)
  Not available.

Specific target organ toxicity (repeated exposure)
  Not available.

Aspiration hazard
  Not available.

Information on likely routes of exposure	:	Not available.	

Potential acute health effects
	
  Eye contact	:	No known significant effects or critical hazards. 	
  Inhalation	:	No known significant effects or critical hazards. 	
  Skin contact	:	No known significant effects or critical hazards. 
  Ingestion	:	No known significant effects or critical hazards. 	

Symptoms related to the physical, chemical and toxicological characteristics
	
  Eye contact	:	No specific data. 	
  Inhalation	:	No specific data. 	
  Skin contact	:	No specific data. 	
  Ingestion	:	No specific data. 	

Delayed and immediate effects as well as chronic effects from short and long-term exposure

  Short term exposure

   Potential immediate effects	:Not available.	
   Potential delayed effects	:Not available.	
  Long term exposure

   Potential immediate effects	:Not available.	
   Potential delayed effects	:Not available.	
  Potential chronic health effects
	  Conclusion/Summary	:	Mixture.Not fully tested.	

  General	:No known significant effects or critical hazards. 	
  Carcinogenicity	:	No known significant effects or critical hazards. 	
  Mutagenicity	:	No known significant effects or critical hazards. 	
  Teratogenicity	:	No known significant effects or critical hazards. 	
  Developmental effects	:	No known significant effects or critical hazards. 	
  Fertility effects	:	No known significant effects or critical hazards. 	

Numerical measures of toxicity

  Acute toxicity estimates
   Not available.

Other information	:	This mixture has not been evaluated as a whole for health effects.  Exposure effects listed are based on existing health data for the individual components which comprise the mixture.	
Section 12. Ecological information	

Toxicity

Product/ingredient nameResultSpeciesExposure35938-01 EXP L9630 NATURAL 0000	Remarks - Acute - Aquatic invertebrates.:	Chemicals are not readily available as they are bound within the polymer matrix.	

  Conclusion/Summary	:	Chemicals are not readily available as they are bound within the polymer matrix.	

Persistence and degradability

Conclusion/Summary	:	Chemicals are not readily available as they are bound within the polymer matrix.	

Conclusion/Summary	:	Chemicals are not readily available as they are bound within the polymer matrix.	

Bioaccumulative potential
   Not available.

Mobility in soil

Soil/water partition coefficient (KOC)	:	Not available.	
Other adverse effects	:	No known significant effects or critical hazards.	

Section 13. Disposal considerations	

Disposal methods	:	The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.	

Section 14. Transport information	

TDG Classification	: 		

ICAO/IATA	: 	Consult mode specific transport rules	

IMO/IMDG (maritime): 	Consult mode specific transport rules	

Section 15. Regulatory information	

Canadian lists

Canadian NPRI	:	None of the components are listed.	
CEPA Toxic substances	:	None of the components are listed.  	

International regulations

Chemical Weapon Convention List Schedules I, II & III Chemicals

Chemical Weapons Convention List Schedule I Chemicals
    None of the components are listed.

Chemical Weapons Convention List Schedule II Chemicals
    None of the components are listed.

Chemical Weapons Convention List Schedule III Chemicals
     None of the components are listed.

Montreal Protocol (Annexes A, B, C, E)
   None of the components are listed.

Stockholm Convention on Persistent Organic Pollutants

Annex A - Elimination - Production
  None of the components are listed.

Annex A - Elimination - Use
  None of the components are listed.

Annex B - Restriction - Production
  None of the components are listed.

Annex B - Restriction - Use
  None of the components are listed.

Annex C - Unintentional - Production
  None of the components are listed.

Rotterdam Convention on Prior Informed Consent (PIC)
   None of the components are listed.

UNECE Aarhus Protocol on POPs and Heavy Metals

Heavy metals - Annex 1
   None of the components are listed.

POPs - Annex 1 - Production
   None of the components are listed.

POPs - Annex 1 - Use
   None of the components are listed.

POPs - Annex 2
   None of the components are listed.

POPs - Annex 3
   None of the components are listed.

Inventory list
Australia	:	Not determined.	
Canada	:	At least one component is not listed in DSL but all such components are listed in NDSL.	
China	:	Not determined.	Europe inventory	:	Not determined.	Japan	:	Not determined.	New Zealand	:	Not determined.	Philippines	:	Not determined.	Republic of Korea	:	Not determined.	Taiwan	:	Not determined.	United States	:	All components are active or exempted.	

Section 16. Other information	

History

  Date of printing	:	05/10/2021	
  Date of issue/Date of revision	:	04/17/2020	
  Date of previous issue	:	00/00/0000	
  Version	:	1.0	
Key to abbreviations	:	ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations 
HPR = Hazardous Products Regulations	
Procedure used to derive the classification	
Classification	Justification	
Not classified.		

References	:	Not available.	
Notice to reader	To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.  Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Particularly this information may not be valid for such material used in conjunction with any other materials or in any process, unless specified in the text.